Water Based Acrylic Dry Lamination Adhesive Glue for Paper to Plastic Film

• Customization: Available
• CAS No.: 42978-66-5
• Bonding Function: Instant Adhesive
• Model NO.: D3003
• Application: Packing
• Material: Acrylic
• Classification: Room Curing
• Main Agent Composition: Inorganic Adhesive Material
• Characteristic: Waterproof
• Promoter Composition: Curing Agent
• Composition: Inorganic Material
• Color: White
• Transport Package: 25kgs, 50kgs, 200kgs/Drum
• Specification: 37%-42%, 42-47%
• Trademark: elite indus
• Origin: China
• HS Code: 350691
• Production Capacity: 15000mts/Year

Product Description

Water Based Acrylic Dry Lamination Adhesive glue For Paper to Plastic Film


Basic Info

Characteristic	Water Based
Composition	Acrylic Ester
Color	White
Shelf Life	6 Months
Packing	50kgs, 200kgs, 1000kgs/Drum

 

Advantage	Save Glue Usage Compare to Vae Glue
Advantage 2	Easy to Chean The Machine After Use The Glue
Application 1	BOPP/Pet Film on Paper
Application 2	Carton Packing
MOQ	500kgs
Trademark	elite indus
Origin	China
HS Code	3506919090

 

Customized Grade	Solid Content Can Be Adjusted From 37% to 47%
pH Value	5.0-7.5
Main Agent Composition	Acrylic Ester
Toxicity	Non Toxic
Free Sample	Below 400g by Express

Brief introduction:

It is benzene/toluene free water based acrylic polymer emulsion adhesive designed for dry bond /heat seal laminating process.
Dry bond lamination is the process of coating the adhesive to plastic film,
drying the adhesive with heat and air flow and then laminating the adhesive to a second substrate(paper/paper board/cardboard etc..) 
via a heat compression nip.

It is mono-component adhesive with very good adhesion to flexible film .
We offer different viscosity adhesive, to meet slow, middle and high speed machine,
it can be used for manual, semi-auto, automatic and high speed full automatic lamination machines.





Advantage:

1. Lower consumption than oil / solvent based lamination adhesives.
2. water based adhesive, free of toluene, eco-friendly.
3, Easy to clean the lamination equipment.
4, can be use for highest speed automatic dry lamination machine.

Specification Data sheet: 

Type	Solid content	Features	Technical Parameter
D1001 D1002 D1003	37%-42%	1, Good surface effect, good brightness and good composite fastness 2, apply for higher speed lamination  3, Less glue consumption, reduce production cost 4, most suitable for common cartons of fruit, food etc... without embossing	1, Appearance: white emulsion 2, Viscosity (MPA.S):100-1000 3, PH value: 6.0-8.0 4, Storage: 6 months 5, Toxicity: non toxic
D2001 D2002 D2003	37%-42%	1, Good surface effect, good brightness and good composite fastness 2, apply for higher speed lamination 3, Less glue consumption, reduce production cost 4, most suitable for PET film to paper ... without embossing
D3003 D3005 D3007	42%-47%	1, Excellent powder cover ability, and composite fastness 2, High brightness and high speed lamination 3, very good effect for processing after lamination, such as partial embossing, heavy embossing, heat embossing etc... 4, suitable for double side lamination, gold/silver card paper lamination.
D5001 D5002 D5003	37%-42%	1, special use for high speed lamination process. 2, lower adhesive consumption, reduce production cost 3, suitable for high speed lamination machine, such as milk box, carton etc.. without embossing process.

Application:

For laminate/bond plastic film like PET, BOPP, MPET to paper, paper board, duplex board.
Suit for manual, Semi-Auto and Automatic machines.
Components: Acrylate copolymer

Suggestion and Notice:

Suggestion:
1, Before lamination, raise the temperature of the laminating machine roller to 95-110ºC, the temperature of the drying tunnel to 80-95ºC.
2, Pour the laminating adhesive into the glue tank, start the roller to keep the adhesive disperse on roller evenly, 
The amount of adhesive consumption shall be flexibly adjusted according to the paper or film need to be laminated.
3, After complete drying the adhesive on film, the real temperature of the roller shall be 80-95ºC, the roller pressure shall be around 6-20kgs. 
4, the pressure roll shall be controlled flexibly to ensure no adhesive overflow from both sides of film and connections.

Notice:
1,  Clean the adhesive tank and roller before use our adhesive;
2,  Do not mix our adhesive with other adhesives;
3,  Our adhesive only apply for BOPP film with corona over 38 Dyne ;
5,  Better make testing for with film or paper, before mass production, to check the color retention or bonding strength.

Packing & Delivery:



50kgs/drum                                              200kgs/drum                                      1000kgs/IBC

20650kgs/1x20'gp without pallet.                16000kgs/1x20'gp with pallet.                    20000kgs /1x20'gp. 
13500kgs/1x20'gp with pallet.





Our Factorty:

Anhui Elite Industrial Co.,LTD was established in 2007, has become one of the leading and professional suppliers
of all kinds ofWater Based Laminating Adhesive in the world market.

Our Product were widely used laminate plastic film like PET, BOPP, MPET to paper and exported to more than
30 countries, Such as Syria, Laos,Vietnam,Indonesia,Saudi,Thailand,Cambodia,Malaysia,Philippines,India, Africa etc.
 

Our production capacity:
 




 

Water based lamination adhesive dry glue	15000mts /year
Water based lamination adhesive wet glue	15000mts/year
Water based protective film adhesive	3000mts/year
Water based Laser film lamination adhesive	3000mts/year
Water based gift box pasting adhesive	3000mts/year
water based sealing adhesive	2000mts / year

Suggestion and Notice:

Suggestion:
1, Before lamination, raise the temperature of the laminating machine roller to 95-110ºC, the temperature of the drying tunnel to 80-95ºC.
2, Pour the laminating adhesive into the glue tank, start the roller to keep the adhesive disperse on roller evenly, 
The amount of adhesive consumption shall be flexibly adjusted according to the paper or film need to be laminated.
3, After complete drying the adhesive on film, the real temperature of the roller shall be 80-95ºC, the roller pressure shall be around 6-20kgs. 
4, the pressure roll shall be controlled flexibly to ensure no adhesive overflow from both sides of film and connections.

Notice:
1,  Clean the adhesive tank and roller before use our adhesive;
2,  Do not mix our adhesive with other adhesives;
3,  Our adhesive only apply for BOPP film with corona over 38 Dyne ;
5,  Better make testing for with film or paper, before mass production, to check the color retention or bonding strength.

Our Company Advantage:
 

1,  Has a professional research center and dozens of R & D team

1)More than 30 modern production bases
2)Profession R&D team, strong R&D ability
3)Advanced research equipment and strong comprehensive strength have laid solid foundation for enterprise's development.

2,And colleges and universities to establish a long-term and stable relations of cooperation

1)The company has introduced the most cutting-edge scientific research achievements
2)At present, it has established long-term and stable cooperation relations with Beijing University of Chemical Technology
3)the company mainly engages in developing water-based environmentally-friendly emulsion-polymerized products

3, Sales service network all over the country, Southeast Asia, to provide you with personal service

1) The company has made remarkable achievements in polymer emulsion materials in domestic market
2) It is highly praised by clients.
3) Meanwhile, the company is positively developing international markets, and our products are exported to
Southeast Asia, European and American markets.


Pls feel free to contact us ,we saaure you of our best service at all times.