Structural Synthetic Macro Fibers Polypropylene Fiber
Description
Elite Concrete Fiber was produced by referring foreign advanced technology for fiber spinning,
modified by adding functional additive and special surface-treating.
While Mixing into cement concrete, it has many advantages such as good dispersing, better water affinity, strong linking force.
It is suited to reinforce and crack-resist to every kinds of cement concrete projects,
specially used in industrial flooring, precast, shotcrete, slabs on ground, tunnel etc.....
Technical Information of Structural Synthetic Macro Fibers Polypropylene Fiber
| Main Material |
Virgin grade polypropylene |
Tensile Strength (MPa) |
>650 |
| Water Absorbency |
No |
Density (g/cm3) |
0.91+/-0.01 |
| Melting Point(C Deg.) |
160 - 170 |
Elastic Modulas (Mpa) |
>10000 |
| Acid & Alkali Resistance |
Excellent |
Equivalent Diameter |
0.8mm |
| Moisture Content |
≤ 0.0% |
Fiber Type |
Embossed |
| Color |
White, Black, Gray, Transparent |
| Length |
30mm,48mm, 55mm, 60mm,65mm or as per request |
| Tandard Dosage |
2kg/m3 to 6kg/m3 |
Packing of Structural Synthetic Macro Fibers Polypropylene Fiber
5kg/box, 1200-1300kg/pallet, 12800kg/20' container, 25600kg/40' container.
Product Show of Structural Synthetic Macro Fibers Polypropylene Fiber
Related Product
ELITE offers a complete line of fiber solutions to deliver stronger, reliable reinforced concrete and mortar.
ELITE is the expert in concrete fibers.
Our main type of concrete fiber as below:
twist or hybrid Macro fibers:
Successfully used to replace steel fibers. Suitable for ready mix Concrete and Shotcrete.
Provide equivalent tensile and bending resistance to conventional reinforcement requirements.
Help mitigate the plastic shrinkage cracking in concrete...
especially good for industrial flooring, basement, square etc...
Synthetic Macro Fiber Twist Synthetic Macro Fiber Hybrid Synthetic Macro Fiber Twist in Short Cut
Synthetic Macro Fiber Wave Synthetic Macro Fiber Embossed (Grey) Synthetic Macro Fiber Embossed (White)
pp Micro Fibers:
PP Micro fiber minimize early age cracking in concrete from plastic shrinkage and plastic settlement, while improving its long term durability and impact resistance...
Polyester fiber with the tensile strength >=850 Mpa, is good at concrete reinforcement, and can be used in Bitumen concrete reinforcement because of the high melting point (>=240ºC)
Polypropylene fiber monofilament Polypropylene fiber Fibrillated (mesh) Polyester fiber (Bitumen concrete use)
Features
1. Provides good impact,fatigue,shrinkage control and ductility in all grade concretes.
2. Cost saving,Is easier to use,to disperse and safe to handle.
3. Can be used in highly corrosive circumstance.
4. The surface has been embossed,which greatly improves the cohesive force between fibres and concrete,and also boosts shrinkage resistance and crack resistance.
5. The toughness of macro synthetic fibre is less stronger than steel fibre. But test has shown slabs on grade and pre-cast concrete predominately require a dosage rate of between 25kg-40kg of steel fibres per cubic meter, in comparison,using between 3kg-10kg of macro synthetic fibre per cubic meter of concrete. Synthetic fibres achieve greater strength and ductility in the matrix.
Estimating Dosage
The dosage rate is dependent on the application however the minimum dosage range is 2kg-6kg/m3.
Typical Application
Shotcrete, and engineering industries, concrete projects, such as:
1. Slab on Grade and elevated construction (distribution centers, warehouses, etc...)
2. Thin walled precast (septic tanks, vaults, walls, etc...)
3. Shotcrete for tunnel linings, pool construction and slope stabilization
4. Pavements and white-toppings
How should the fibre be used?
The fibres are wrapped with water-soluble film and uniquely packaged in water soluble paper boxes.Just throw the whole boxes of fibres into the concrete mixture, the boxes and film will dissolve within seconds, leaving the fibres to disperse evenly throughout the mixture.
Our Company
ELITE was established in 2007, has become one of the leading and professional suppliers of many kinds of Concrete Reinforcement Fibers in the world market.
ELITE fibers are made by 100% virgin materials with advanced equipment of yarn and cutting.
We have one full set of precise testing instrument and quality inspection team, technology research & Development team.
Elite own a team with 15+ years experience.
We know well of Chinese Concrete reinforcement fibers on technical inspection, marketing, transportation.
){kind=link}
){kind=link}