HDPE Dimple Membrane Waterproof Drainage Board with Height 0.6mm 10mm 150g

• Customization: Available
• Color: Black
• Application: Electrical Engineering, Roads & Railways & Airports Project, Water Conservancy Project
• Model NO.: Elt-Composite
• Classification: Composite Geotextiles
• Material: HDPE
• Type: Composite Geomembrane
• Product Name: HDPE Dimple Membrane Waterproof Drainage Board
• Other Name: HDPE Dimple Geomembrane
• Board Sheet Thickness: 0.5mm to 2.0mm
• Dimple Height: 8/10/12/15/16/20mm
• Geotextile Type: PP or Pet Non Woven
• Geotextile Weight: 100G/M2 to 300G/M2
• Width: 1m to 3m
• Length: Normal Is 30m,Can as Per Your Request
• Main Application: Roof Garden, Tunnel,Football Field etc
• Certificate: ISO/CE
• Transport Package: Width 2.4m, Length30m/Roll, 3240m2/20′gp
• Specification: CE
• Trademark: elite-indus
• Origin: Anhui
• HS Code: 3920109090
• Production Capacity: 10000m2/ Day

Product Description

HDPE Dimple Membrane Waterproof Drainage Board 0.6mm 10mm 150g

----EltMembrane-CDG

Introduction:
EltMembrane-CDG series of geomembrane is manufactured from High Density Polyethylene resins. Produced by extruding plastic sheet into dimple shape. These dimples, in spatial structure with certain height. Can resist long-term high pressure without deformation. On the top of the dimples, there is filtration geotextile to make sure the drainage channel ruing well without any block for any articles. For example, filling particles or concrete.



Property:

Low-cost,
high efficiency;
Durable;
Chemical resistance,
resistance to puncture of plant roots;
Diverse application;
Simple installation and quality guaranteed.

Productive Processes:
Application:

1, Landscape engineering: Garage top greening, roof garden, football field, golf course, beach project.
2, Municipal engineering: Road base, subway, tunnel, landfill.
3, Construction engineering: Upper or bottom layer of building foundation, basement wall, bedding filtration and heat insulation.
4, Traffic engineering: Highway, railway basement, dam and slope.

Specification:
 

NO.	Item Name	Technical requirements
		H10-1.0	H20-1.0	H10-1.5	H20-1.5	H10-2.0	H20-2.0
1	Tensile  strength  N/<5cm>         ≥	400	400	500	500	700	700
2	Elongation at break  %            ≥	200	200	300	300	400	400
3	Dimensional  strength  Mpa     ≥	400	320	450	370	500	420
4	Dimensional stability %	±2
5	Low temperature impact brittle property	-35C crack-free bending
6	Longitudinal  flow  capacity cm3/s( hydraulic pressure 5Kpa)	5.6	8.6	5.6	8.6	5.6	8.6
7	Longitudinal  flow  capacity cm3/s( hydraulic pressure 350Kpa)	15.2	18.2	15.2	18.2	15.2	18.2

Container Loading and Application Processes