Shrinkage Cracking Resistance 48mm 54mm Curved Wave Embossed Polypropylene Macro Fiber

• Customization: Available
• Application: Concrete Reinforcement
• Color: White
• Model NO.: Elt-PP 022
• Length: 48mm, 55mm, 65mm
• Material: Polypropylene Fiber
• Tenacity: High Tenacity
• Type: Microfiber
• Raw Material: Virgin Polymer
• Equivalent Dia(mm): 0.8-1.2
• Fiber Type: Embossed
• Tensile Strength(MPa): 560 Min.
• Usage: Concrete
• Melting Point(C Deg. ): 160-170
• Elastic Modulas: 900 Min
• Crack Elongation: 20+/-5%
• Strength Grade(MPa): 450 Min.
• Function: Strengthen, Waterproof, Common Cement
• Certification: CE, ISO
• Transport Package: 12800 Kgs/20 Gp
• Specification: /1 KG per PE bag, 10 Kg/Nonwoven bag
• Trademark: ELITE-INDUS
• Origin: Anhui
• HS Code: 55034000
• Production Capacity: 600mts/Month
• Package Size: 30.00cm * 25.00cm * 30.00cm
• Package Gross Weight: 5.500kg

Product Description

Shrinkage Cracking Resistance 48mm 54mm Curved Wave Embossed Polypropylene macro Fiber

Description:
ELITE fiber Embossed is a patented polypropylene / polyethylene macro synthetic fiber successfully used to replace steel fibers, welded wire mesh and conventional reinforcing bars in a wide variety of applications. Our Macro Synthetic Fiber comply with ISO CE and suitable for Concrete and Shotcrete,
and are specifically used to provide equivalent tensile and bending resistance to conventional reinforcement requirements.

Concrete with our Macro fiber will have three-dimensional reinforcing with enhanced flexural toughness, impact and abrasion resistance and will also help mitigate the formation of plastic shrinkage cracking in concrete.
Dosage rates will vary depending upon the reinforcing requirements and can range from 2.0 kg/m³ to 8.0 kg/m³.



Technical Information of polypropylene macro fiber

Minimum Tensile Strength	> 550 MPa
Modulus	> 9000 Mpa
Fibre dimension	L:48 mm /55 mm /65mm;
Melt Point	170ºC
Density	0.91g/cm3
Melt flow	3.5
Acid & Alkali Resistance	Excellent
Moisture Content	≤ 0%
Appearance	White, black, gray, Embossed

Featureof polypropylene macro fiber
1. Provides good impact,fatigue,shrinkage control and ductility in all grade concretes.
2. Cost saving,Is easier to use,to disperse and safe to handle.
3. Can be used in highly corrosive circumstance.
4. The surface has been embossed,which greatly improves the cohesive force between fibres and         concrete,and also boosts shrinkage resistance and crack resistance.
5. The toughness of macro synthetic fibre is less stronger than steel fibre. But test has shown slabs on  grade and pre-cast concrete predominately require a dosage rate of between 25kg-40kg of steel fibres per cubic meter, in comparison,using between 3kg-10kg of macro synthetic fibre per cubic meter of concrete. Synthetic fibres achieve greater strength and ductility in the matrix.
 
Estimating Dosage of polypropylene macro fiber
The dosage rate is dependent on the application however the minimum dosage range is 2kg-6kg/m3.

Typical Application of polypropylene macro fiber
Shotcrete, and engineering industries, concrete project,like:
1.Slab on Grade and elevated construction (distribution centers, warehouses, etc.)
2.Thin walled precast (septic tanks, vaults, walls, etc.)
3.Shotcrete for tunnel linings, pool construction and slope stabilization
4.Pavements and white-toppings
 
Packing of polypropylene macro fiber
5kg/box, 1200-1300kg/pallet, 12800kg/20' container, 25800kg/40' container.


 
How should the fibre be used?
The fibres are wrapped with water-soluble film and uniquely packaged in water soluble paper boxes.Just throw the whole boxes of fibres into the concrete mixture, the boxes and film will dissolve within seconds, leaving the fibres to disperse evenly throughout the mixture.

Our Company:
ELITE was established in 2007, has become one of the leading and professional suppliers of many kinds of Concrete Reinforcement Fibers in the world market.

ELITE fibers are made by 100% virgin materials with advanced equipment of yarn and cutting. We have one full set of precise testing instrument and quality inspection team, technology research & Development team.

Elite own a team with 10+ years experience.We know well of Chinese Concrete reinforcement fibers   on technical inspection, marketing, transportation.