| Customization: | Available |
|---|---|
| Appearance: | Buff or Offwhite Powder, Free-Flowing |
| Type: | water-reducing admixture |
|
Still deciding? Get samples of US$ 3/kg
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Non-Organic Thiocyanates Thiosulfates Mix Organic Polymethylene Naphthalene Sulfonates Sodium Salts Polymethylene Naphthalene Sulfonates Plasticizers
Polycarboxylate Superplasticizer are designed for use in the production of dry construction mixes on the basis of the cement, gypsum, magnesia and polymer binding agents. The principle of action of the plasticizers is based on dispersion of the particles of binding agent due to electrostatic and steric effect of the adsorbed molecules of the plasticizer. The steric effect is achieved due to the hydrophobic side chains of the molecule of polycarboxylate ether.
Addition of the polycarboxylate plasticizer makes it possible to:
considerably decrease the amount of tempering water;
increase the setting time;
increase the fluidity of mixture;
decrease the consumption of binding agent;
increase the ultimate strength.
Standard Compliance
ELITE Polycarboxylate Superplasticizer complies with the requirements of the following standards:
ASTM C 494, Type F,G and E. BS EN 934-2.
| Item | ELT-E033 ELT-E035 (Powder) |
ELT-WR (High Water Reduction) |
ELT-SR (High Slump Retention and Water Reduction) |
ELT-PSR (High slump retention) |
| Visual Appearance | White fine powder | Dark Yellow Liquid | Light Yellow Liquid | Light Yellow Liquid |
| Solid Content (%) | 98.0±1.0 | 40.0±1.0 , 50.0±1.5 | 40.0±1.0 , 50.0±1.5 | 40.0±2.0 |
| Density (23ºC)(kg/m3) | 1.10±0.05 | 1.10±0.05 | 1.10±0.05 | |
| Chloride Content (%) | ≤0.10 | ≤0.2 | ≤0.2 | ≤0.2 |
| Na2SO4 Content (%) | ≤4.0 | ≤0.5 | ≤0.5 | ≤4.0 |
| Water Reduction Rate (%) | ≥30% | ≥25% | ≥25% | ≥25% |
| Solubility | Completely Soluble | Completely Soluble | Completely Soluble | Completely Soluble |
Applications
1. Tile adhesives and joint fillers.
2. non-shrink grouts
3. Self-leveling floor screeds or underlayments
4. Repair mortars
5. Gypsum products
6. Injection mortars.
7. Molding and industrial plaster.
8. Dry mixed concrete, high performance concrete, high flowability concrete and so on
Polycarboxylate ether superplasticizer PCE mother liquid 40%, 50% solid content:
ELT-WR: high water reducing type
ELT-SR: high water reducing and slump retention type
Packing A IBC tank: 1.1 ton/IBC tank, Total: 18 tanks, 19.8 ton/20' gp container
Packing B Barrels: 220 kg/barrel, Total: 80 barrels, 17.6 ton/ 20' container
Packing C Flexitank: 22 ton/ Flexitank Total: 22 ton/ Flexitank/ 20' container
| Delivery Time | 3-15 days after deposit (we always keep inventory) |
| Sample Time | 1-3 days after confirmation |
| Production Time | 7-15days |
| Payment Methods | T/T, L/C, Western Union or as per negotiate |
Advantages
- Provides high quality durable concrete.
- Powerful plasticizing action with an improved initial workability, easier placing and faster strength development.
-. Reduce water cement ratio to the maximum which allows production of high strength concrete.
- Capability of delivering high performance concrete at any time to the job site in place.
- It can be either used alone or after compounded with other additives to make special concrete such as pumping concrete, ready mixed concrete etc.
Dosage
The optimum dosage of Polycarboxylate Superplasticizer to meet specific requirements should always be determined by trials using the materials and conditions that will be experienced in use.
|
|
ELT-E033 (Powder) |
ELT-WR (High Water Reduction) |
ELT-SR (High Slump Retention and Water Reduction) |
ELT-PSR (High slump retention) |
Normal dosage range |
0.15 to 0.3 kgs/100 kg of cementitious material | 0.25 to 0.8 kgs/100 kg of cementitious material | 0.25 to 0.8 kgs/100 kg of cementitious material | 0.25 to 0.8 kgs/100 kg of cementitious material |
){kind=link}