Polycarboxylate/Naphthalene Based Concrete Water Reducer Powder/Liquid/Flake Type
1.Introduction
Water reducing admixture are special chemical products added to a concrete mixture before it is poured. They are from the same family
of products as retarders. The first class of water reducers was the lignosulfonates which has been used since the 1930s. These inexpensive
products were derived from wood and paper industry, but are now advantageously replaced by other synthetic sulfonate and polycarboxylate,
also known as superplasticizers.
We main have water reducer is : Sodium Naphthalene Sulfonate Formaldehyde (SNF), Polycarboxylate Superplasticizer (PCE)
Liquid 40% 50% Solid, Polycarboxylate Superplasticizer (PCE) Powder, Polycarboxylate Superplasticizer (PCE) Flake type.
PCE Liquid Type PCE Powder Type PCE Flake Type SNF Powder Type
2.Technical specification
1) PCE Liquid:
Item Description |
Specification |
Elt-WR (Water reducing style) |
Elt-SR (Slump retention style) |
Solid Content(%) ≥ |
40±1.0 or 50±1.0 |
40±1.0 or 50±1.0 |
Appearance |
Brown /Colorless/Yellowish Liquid |
Brown /Colorless/Yellowish Liquid |
Density(g/cm3) |
1.05 |
1.05 |
Chloride Content (% )≤ |
0.02 |
0.02 |
PH Value |
6.5±1.0 |
6.5±1.0 |
Cement paste Fluidity (mm) ≥ |
230 |
220 |
Water Reduction (%)≥ |
25-36 |
25-33 |
Air Content (%)≤ |
3.0 |
3.0 |
Corrosion to Steel Bars |
None |
None |
2) PCE Flake
Visual |
Moisture |
Insoluble matter |
PH(20%solution) |
flake transparent crystalline |
≤0.1% |
≤0.1% |
5~7 |
3) PCE Powder
Density |
Solid Content |
PH value |
Chloridion |
Total Alkali |
500±15 |
98±1% |
7--9 |
<0.1% |
<5% |
4) SNF Powder
INDEXITEM |
Elt-A |
Elt-B |
Elt-C |
Appearance |
Light brown powder |
Light brown powder |
Light brown powder |
Solid Content |
≥92 |
≥92 |
≥92 |
Sodium sulphate Content |
5% |
10% |
20% |
Chloride Content |
0.3% |
0.4% |
0.5% |
PH Value |
7-9 |
7-9 |
7-9 |
Net Starch Fluidity |
≥250 mm |
≥240 mm |
≥230 mm |
Surface Tension |
70±1×10-3N/M |
70±1×10-3N/M |
70±1×10-3N/M |
3, Performance
1), high water reduction, water reduction rate of more than 25 to 40 percent.
2), high flow, high slump, concrete slump when small losses.
3), there is a significant hardening of concrete reinforcing effect, 3d strength can be increased 50 ~100%, 7d, 28d strength can be increased by
30-50%, the late strength remained stable growth.
4), good workability of fresh concrete, no segregation,good pumpability, sclerosing outside light in solid concrete.
5), chlorine-free, low-alkali, no corrosion of steel.
6), gas content can be adjusted according to project needs.
7), significantly improve the concrete antifreeze, impermeability,low-carbon capabilities, as well as anti-shrinkage and other indicators, can
significantly extend the service life of concrete.
8), the product has a good adaptability to meet the many varieties of cement, especially for fly ash, ground slag and other active admixture
preparation of high-strength, high flow, high performance concrete.
9) the product non-toxic, harmless to health and the environment are safe.
4.Application
1, for the preparation of various levels of pumping concrete,long-distance transport of commercial concrete.
2, suitable for high-strength concrete, fluidized concrete,self-compacting, mass concrete, high performance concrete,concrete structure of water.
3, for a variety of civil works, high-rise reinforced concrete frame structure, Especially for highway, railway, bridge engineering, tunnel engineering,
hydraulic dams, nuclear power engineering, ports, docks,and other underground facilities that require high durability of concrete large concrete
structure, but also for large prestressed concrete beams, plates production , steam curing concrete and so on.
5.Package & Storage
1) PCE Liquid: 1.15Ton/IBC Tank, 23ton/20'gp,26ton/40'gp
2) PCE Flake: 25kg/Plastic Woven bab, 17ton/20'gp,26ton/40'gp
3) PCE Powder:25kg/Drum, 12ton/20'gp,24ton/20'gp
4) SNF Powder: 25kg/Plastic Woven bab, 17ton/20'gp,26ton/40'gp
A: PCE FLAKE/POWDER and SNF Powder Packing
B: PCE Liquid Packing:
6,our company:
Anhui Elite Industrial Co.,LTD was established in 2007, has become one of the leading and professional suppliers of all kinds of
Concrete additive in the world market.
Our Product were widely used in all kinds of concrete,mortar,plaster projects and exported to more than 30 countries, Such as USA,
Russia, Germany, Australia, Chile, UAE, Korea, Vietnam, Africa etc.
Our Product was made by 100% Virgin Material with advanced equipment , we have one full set of precise testing instrument,
testing equipment and quality inspection team, technology research and development team. the management system was certified
by ISO9001 and our products have been passed the CE Certification.
Our Mainly Product and Production Capacity as below:
Item |
Capacity/Annual |
Polypropylene Fiber (PP Fiber) |
15000mts |
Polyester Fiber(PET Fiber) |
6000mts |
Polyvinyl Alcohol Fiber( PVA Fiber) |
30000mts |
Polyacrylonitrile Fiber(PAN Fiber) |
6000mts |
Naphthalene Formaldehyde Sulphonate |
300000mts |
Polycarboxylate Superplasticizer |
150000mts |
Micro Synthetic Fiber ELT-Mono Micro Synthetic Fiber ELT-Fibril Macro Synthetic Fiber ELT-Embossed
Macro Synthetic Fiber ELT-Twist Macro Synthetic Fiber ELT-Wave Hook End Steel Fiber ELT-HE
7,Our Certificate: