Synthetic Fibers Twisted Type with Fibrillated Fiber

• Customization: Available
• Chemical Composition: Microfibers
• Color: Grey, White
• Model NO.: Elt-hybrid fiber
• Function: Crack Prevention, Crack Repair, High Strength Fiber
• Type: Fiber Reinforcement
• Fiber Type: Staple
• Length: 20, 48, 50, 54mm Ect
• Shape: Hybrid
• Density(g/cm3): 0.91 +/- 0.01
• Equivalent Dia(mm): 0.3±0.05
• Crack Ratio: 20+/-5 %
• Product Name: Twisted Type with Fibrillated Fiber
• Tensile Strength: >500 MPa
• Elastic Modulus (MPa): >3500
• Raw Material: PP
• Break Tensile Ratio(%): 8-15
• Usage: Concrete
• Material: 100% Polypropylene
• Feature: Anti-Pilling, Abrasion-Resistant, Flame Retardant, Anti-Distortion, Anti-Static, Heat-Resistant
• Pattern: Plain
• Width: 47/48"
• Structure: PP
• Transport Package: 1000g/PE Film Bag,10kgs/Plastic Woven Bag,5.5tons
• Specification: CE
• Trademark: elite-indus
• Origin: Anhui
• HS Code: 5503400000
• Production Capacity: 6000 Tons Per Year

Product Description

                           Synthetic Fibers Twisted Type with Fibrillated Fiber

                                                                                                       
1, Synthetic Fibers Introduction
EltFiber-PPT/B Hybrid fibre can beused to instead of steel fibre for reinforcement to cement concrete.
Compared with steel fibre, it has the advantage of easy dispersing and blending, no damage to the mixingequipments, etc....

The synthetic fibers use polypropylene resin as its raw material, produced by special parallel thread extruding & twisting process.
It has high break strength, better dispersion and strong combining ability,
it is widely be used to instead of steel fibre to reinforce the cement concrete and crack resistant.





2, Synthetic Fibers specification:

Density (g/cm3)	0.91 +/- 0.01	Raw material	PP
Length (mm)	20,30,48,50, 54mm	Equivalent Dia. (mm)	0.3±0.05
Shape	twisted/bunchy	break tensile Ratio (%)	8-15
Crack Ratio	20+/-5 %	Melting point ( C. Deg)	160-170
Tensile Strength	>500 mpa	Water absorbency	NO
Elastic Modulus (mPa)	>3500	Resistance to acid & alkali	strong

Recommend adding quantity: 2.0 - 3.0 kgs fiber to one cubic meter concrete as per different application.

3. Synthetic Fibers Function:
A. Decrease the fragility of high strength concrete;     
B. Increase the quality of concrete;
C. Increase the freezing resistance of concrete;           
D. Increase the impact resistance of concrete;
E. Increase the durability resistance of cncrete;           
F. Increase the fire resistance of concrete.

4. Synthetic Fibers Package: 1000g/pe film bag,
  10kgs/plastic woven bag, 5.5tons/1x20`gp, or 13tons/1x40`HQ. 
   May packed as customers' requirement, Water soluble bag and Carton is also okay.

5. Synthetic Fibers Application Field:
A. The surface of road, bridge, runway etc...
B. Wall and roof of the tunnel and mine.
C. Dam, river, bridge pier, dock and military protection facilities.
D. Industrial floorings



6. Synthetic Fibers Applying Instruction
(1) Ration design of the fibre concrete:
     Generally the recommended amount to add to the concrete is more than 2.7kg per sqm ( volume ratio is
      0.3% ), reinforcement adding amount is 5.5kg, Compared with adding 47kg of steel fibre, 5.4kg polymer
      fibre has the same volume ratio to the concrete.

(2) Fiber length: 48mm or 54mm for common crack-resistant requirement.

(3) Matching Ratio:
     Usually, it is no need to Change the matching ratio of the concrete.
     Considering the requirement of fissure-resistant, the polymer fiber is recommend to combine with the   
     polypropylene fiber mesh with the volume ratio of 1: 1 ( 0.9kg fiber-mesh per sqm of cement concrete).

(4) Mixer Adoption: Double-axle horizontal compelling mixer is priority.
(5) Mixing process:
      Crushed stones, fibers and sands are put into the mixer in succession. After stirring for two minutes,fiber will
     fully spread and then add cement and water and stir normally.
     The addition of materials also can be put into as common concrete,but the stirring time
     should be properly prolonged to make fiber completely Mixed.
(6) Shaping & Maintenance
      There is no special requirement, may along the vibrating time for 30s, The maintenance of the fibre
      concrete should be done same as the normal concrete.

Mainly concrete fiber :

Our Company:
Re-founded in 2007, Anhui Elite Industrial Co.,Ltd (hereafter called AEI) is a professional supplier of Concrete Reinfocing Fiber including 
Polypropylene Fiber (Monofilament, Fibrillated, Twisted, Hybrid, Waved, embossed ), Polyester Fiber, Polyacrylonitrile fiber etc....

Anhui Elite technology in China is a market leader in the design and manufacturer of innovative Concrete Fiber.
Own a team with more than 10years Concrete field working experience, on technical, inspection, marketing, transportation and after-sale service.




                 Our Advantage                                                                    Our Service

1. We are SGS verified Chinese supplier                                     1. Free sample available 
2. CE certificate offered for some products                                  2.Trial order acceptable
3. Professional Reinforcing Fiber suppliers                                  3.Customized packing acceptable
4, Standard service to your orders                                               4.Flexible payment terms 
5. Small order / OEM order acceptable                                         5.Certified cargo inspection process