Customization: | Available |
---|---|
Appearance: | Powder |
Application: | Concrete Admixture |
Still deciding? Get samples of US$ 10/kg
Order Sample
|
Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
---|
Payment methods: |
![]() ![]() ![]() ![]() ![]() ![]() ![]() |
---|---|
Support payment in USD |
Secure payments: | Every payment you make at Made-in-china.com is protected by the platform. |
---|
Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
1. Introduction
Naphthalene formaldehyde sulphonate water reducing agent is a synthetic powder based on beta sulphonate formaldehyde condensate
and reactive polymer.
It has the properties of high range water reduction, set retarding and excellent strengthening.
Elt-nsf sodium sulfate is less than 10% , suitable to middle strength or high strengthconcrete where high range water reduction is desired.
INDEXITEM | Elt-A | Elt-B | Elt-C |
Appearance | Light brown powder | Light brown powder | Light brown powder |
Solid Content | ≥92 | ≥92 | ≥92 |
Sodium sulphate Content | 5% | 10% | 20% |
Chloride Content | 0.3% | 0.4% | 0.5% |
PH Value | 7-9 | 7-9 | 7-9 |
Net Starch Fluidity | ≥250 mm | ≥240 mm | ≥230 mm |
Surface Tension | 70±1×10-3N/M | 70±1×10-3N/M | 70±1×10-3N/M |
A. Used for and widely for self-cured, vapor-cured concrete and its formulations. At the early stage of application, extremely prominent
effects are shown. As the result, the modulus and site utilization can be drastically, the procedure of vapor cure is omitted in peak-heat
summer days. Statistically 40-60 metric tons of coal will be preserved when a metric ton of the material is consumed.
B.Suitable for preparation of early-strength, high-strength, high-anti-filtration and self-sealing& pumpable concrete.
C.Widely used in pre-cast & ready-mixed concrete, armored concrete and pre-stressed reinforced concrete in key construction projects
such as dam and port construction, road building & town planning projects and dwelling erections etc.
D.Compatible with Portland cement, normal Portland cement, Portland slag cement, fly-ash cement and Portland pozzolanic cement etc.
A. Blending dosage at 0.5%-1.0%, 0.6% mixing dosage advised.
B. Prepare solutions as required.
C. Direct use of powder agent is allowed. Alternatively the addition of the agent is followed by water moisturization (water-cement ratio:60%).
6.Parameters&accepttance criteria(For reference)
A.Elt-A
Parameters | Criteria | Actual Results | Parammeters | Criteria | Actual Results | ||
Water reduction,Min % | ≥14 | 18-28 | Compression strength,% |
1d | ≥140 | 170 | |
Water Penetration,Max % | ≤90 | 79 | 3d | ≥130 | 160 | ||
Air Content,% | ≤3.0 | 1.6 | 7d | ≥125 | 145 | ||
Temporal distribution for setting(min) |
Initial setting time | -90 ~ +120 |
|
28d | ≥120 | 135 | |
Terminal setting time | Shrinkage,% |
|
|
|
|||
Corrosion to steel bars | None | None | |||||
Note:Standard Blend Dosage:0.75%(as cement amount) |
B.Elt-B
Parameters | Criteria | Actual Results | Parammeters | Criteria | Actual Results | ||
Water reduction,Min % | ≥14 | 17-25 | Compression strength,% | 1d | ≥140 | 165 | |
Water Penetration,Max % | ≤90 | 80 | 3d | ≥130 | 155 | ||
Air Content,% | ≤3.0 | 1.6 | 7d | ≥125 | 140 | ||
Temporal distribution for setting(min) |
Initial setting time | -90 ~ +120 |
|
28d | ≥120 | 130 | |
Terminal setting time | Shrinkage,% |
|
|
|
|||
Corrosion to steel bars | None | None | |||||
Note:Standard Blend Dosage:0.75%(as cement amount) |
C.Elt-C
Parameters | Criteria | Actual Results | Parammeters | Criteria | Actual Results | ||
Water reduction,Min % | ≥14 | 16-22 | Compression strength,% | 1d | ≥140 | 160 | |
Water Penetration,Max % | ≤90 | 85 | 3d | ≥130 | 150 | ||
Air Content,% | ≤3.0 | 2.0 | 7d | ≥125 | 140 | ||
Temporal distribution for setting(min) |
Initial setting time | -90 ~ +120 |
|
28d | ≥120 | 125 | |
Terminal setting time | Shrinkage,% |
|
|
|
|||
Corrosion to steel bars | None | None | |||||
Note:Standard Blend Dosage:0.75%(as cement amount) |
Our Mainly Product and Production Capacity as below:
Item | Capacity/Annual |
Polypropylene Fiber (PP Fiber) | 15000mts |
Polyester Fiber (PET Fiber) | 6000mts |
Polyvinyl Alcohol Fiber ( PVA Fiber) | 30000mts |
Polyacrylonitrile Fiber (PAN Fiber) | 6000mts |
Naphthalene Formaldehyde Sulphonate | 300000mts |
Polycarboxylate Superplasticizer | 150000mts |
Micro Synthetic Fiber ELT-Mono Micro Synthetic Fiber ELT-Fibril Macro Synthetic Fiber ELT-Embossed
Macro Synthetic Fiber ELT-Twist Macro Synthetic Fiber ELT-Wave Hook End Steel Fiber ELT-HE
8,Our Certificate: